CSA10
♦ 2" Hex output shaft
♦ 10-20gpm Hydraulic flow range
♦ Planetary gearbox with Center and 18" offset mount
♦ 6",9",12",15",18" and 24" Auger diameters available
♦ 50¾" Auger length
♦ Category 2 plate
SA20
♦ 2" Hex output shaft
♦ Available in low flow 10-20gpm or high flow 15-30gpm
♦ Planetary gearbox with Center and 18" offset mount
♦ 6",9",12",15",18",24",30" and 36" Auger diameters available
♦ 50¾" Auger length
♦ Skid steer quick attach
SA35
♦ 2" Hex output shaft
♦ 10-30gpm Hydraulic Requirement
♦ Planetary gearbox with Center and 18" offset mount
♦ 6",9",12",15",18",24",30" and 36" Auger diameters available
♦ 50¾" Auger length
♦ Skid steer quick attach
SG2572
♦ 72" working width
♦ 6 straight shanks
♦ Four 1/2" reversible cutting edges
♦ Adjustable grading blade frame up to 1½" below the skid shoes
♦ Tapered 3/8" full length skid shoes
♦ Bucket carrier lugs on top
♦ Skid steer quick attach
♦ 886lbs
SG2584
♦ 84" working width
♦ 7 straight shanks
♦ Four 1/2" reversible cutting edges
♦ Adjustable grading blade frame up to 1½" below the skid shoes
♦ Tapered 3/8" full length skid shoes
♦ Bucket carrier lugs on top
♦ Skid steer quick attach
♦ 952lbs
SR2772
♦ 72" working width
♦ Hydraulic angle
♦ 14 Pin Connection
♦ Bi-directional operation
♦ Carbide tipped studs
♦ 12-24 GPM
SR2790
♦ 90" working width
♦ Hydraulic angle
♦ 14 Pin Connection
♦ Bi-directional operation
♦ Carbide tipped studs
♦ 15-24 GPM
BB1248
♦ 48" Working width
♦ Box height of 15" and 23" depth with capacity of 9.4 ft³
♦ Four 3/4" wide ripper teeth with replaceable tips
♦ Two 3/8" reversible cutting edges front and rear
♦ Quick hitch compatible category 1 hitch
♦ 290lbs
BB1260
♦ 60" Working width
♦ Box height of 15" and 23" depth with capacity of 11.75 ft³
♦ Four 3/4" wide ripper teeth with replaceable tips
♦ Two 3/8" cutting reversible edges front and rear
♦ Quick hitch compatible category 1 hitch
♦ 346lbs
BB1266
♦ 66" Working width
♦ Box height of 15" and 23" depth with capacity of 12.92 ft³
♦ Five 3/4" wide ripper teeth with replaceable tips
♦ Two 3/8" cutting reversible edges front and rear
♦ Quick hitch compatible category 1 hitch
♦ 370lbs
BB1272
♦ 72" Working width
♦ Box height of 15" and 23" depth with capacity of 14.1 ft³
♦ Six 3/4" wide ripper teeth with replaceable tips
♦ Two 3/8" cutting reversible edges front and rear
♦ Quick hitch compatible category 1 hitch
♦ 404lbs
BB2572
♦ 72" Working width
♦ Box height of 17" and 22" depth with capacity of 14.7 ft³
♦ Seven 3/4" wide ripper teeth with replaceable tips
♦ Two 1/2" reversible cutting edges front and rear
♦ Quick hitch compatible category 1 hitch
♦ 549lbs
BB2584
♦ 84" Working width
♦ Box height of 17" and 22" depth with capacity of 17.1 ft³
♦ Seven 3/4" wide ripper teeth with replaceable tips
♦ Two 1/2" reversible cutting edges front and rear
♦ Quick hitch compatible category 1 hitch
♦ 593lbs
BB3584
♦ 84" Working width
♦ Box height of 23" and 35" depth with capacity of 32 ft³
♦ Seven ripper teeth with replaceable tips
♦ Two 1/2" reversible cutting edges front and rear
♦ Quick hitch compatible category 1 & 2 hitch
♦ 855lbs
DH1060
♦ 60" working width
♦ 16" disk blades with 7-1/2" spacing
♦ Adjustable disk angles of 0°, 7°, 14°, 21°
♦ Quick hitch compatible category 1 hitch
♦ 533lbs
DH1560
♦ 60" working width
♦ 18" disk blades with 7-1/2" spacing
♦ Adjustable disk angles of 0°, 7°, 14°, 21°
♦ Quick hitch compatible category 1 hitch
♦ 628lbs
DH1572
♦ 72" working width
♦ 18" disk blades with 7-1/2" spacing
♦ Adjustable disk angles of 0°, 7°, 14°, 21°
♦ Quick hitch compatible category 1 hitch
♦ 714lbs
DH1590
♦ 90" working width
♦ 18" disk blades with 7-1/2" spacing
♦ Adjustable disk angles of 0°, 7°, 14°, 21°
♦ Quick hitch compatible category 1 hitch
♦ 865lbs
Land Pride DH2572
♦ 72" working width
♦ 20" disk blades with 7-1/2" spacing
♦ Adjustable disk angles of 0°, 7°, 14°, 21°
♦ Quick hitch compatible category 1 or 2 hitch
♦ 947lbs
DRG04
♦ 4' x 4' Working blanket size
♦ 2 Log chains with pull ring
♦ 1/2" Diameter tines
♦ 89lbs
DRG06
♦ 6' x 4' Working blanket size
♦ 2 Log chains with pull ring
♦ 1/2" Diameter tines
♦ 138lbs
GS0548
♦ 48" working width
♦ Four 3/4" wide ripper teeth with replaceable tips
♦ Two 3/8" Reversible grading blades
♦ Full length 1/4" skid shoes
♦ Quick hitch compatible category 1 hitch
♦ 310lbs
GS0560
♦ 60" working width
♦ Four 3/4" wide ripper teeth with replaceable tips
♦ Two 3/8" Reversible grading blades
♦ Full length 1/4" skid shoes
♦ Quick hitch compatible category 1 hitch
♦ 350lbs
GS1560
♦ 60" working width
♦ Four 3/4" wide ripper teeth with replaceable tips
♦ Two 1/2" Reversible grading blades
♦ Adjustable grading blade frame up to 1½" below the skid shoes
♦ Full length 3/8" skid shoes
♦ Quick hitch compatible category 1 hitch
♦ 511lbs
GS1572
♦ 72" working width
♦ Four 3/4" wide ripper teeth with replaceable tips
♦ Two 1/2" Reversible grading blades
♦ Adjustable grading blade frame up to 1½" below the skid shoes
♦ Full length 3/8" skid shoes
♦ Quick hitch compatible category 1 hitch
♦ 594lbs
GS2584
♦ 84" working width
♦ Four 3/4" wide ripper teeth with replaceable tips
♦ Two 1/2" Reversible grading blades
♦ Adjustable grading blade frame up to 1½" below the skid shoes
♦ Full length 3/8" skid shoes
♦ Quick hitch compatible category 1 or 2 hitch
♦ 796lbs
LR0560
♦ 60" working width
♦ 34 teeth with 1¾" spacing on centers
♦ High carbon spring steel 1/4" x 3/4" wide teeth
♦ 5 forward position angling from 0° to 30°
♦ Quick hitch compatible category 1 hitch
♦ 113lbs
LR1660
♦ 60" working width
♦ 30 teeth with 2" spacing on centers
♦ High carbon spring steel 5/16" x 1" wide teeth
♦ 7 forward position angling from 0° to 45°
♦ Quick hitch compatible category 1 hitch
♦ Optional gauge wheel kit available
♦ 241lbs
LR1672
♦ 72" working width
♦ 36 teeth with 2" spacing on centers
♦ High carbon spring steel 5/16" x 1" wide teeth
♦ 7 forward position angling from 0° to 45°
♦ Quick hitch compatible category 1 hitch
♦ Optional gauge wheel kit available
♦ 270lbs
PD10
♦ 2" Round shaft gear box output
♦ 30" auger length with 6",9",12" auger options
♦ 15hp - 30hp HP operating range
♦ 540RPM PTO with shear bolt protection
♦ Category 1 hitch
♦ 120lbs without auger
Land Pride PD15
♦ 2" Round shaft gear box output
♦ 48" auger length with 6",9",12",15" and 18" auger options
♦ 20hp - 40hp HP operating range
♦ 540RPM PTO with shear bolt protection
♦ Category 1 hitch
♦ 161lbs without auger
RB0560
♦ 60" Working width, 13½" blade height
♦ 5 Forward positions 0° up to 30°
♦ 5 Reverse positions 0° up to 30°
♦ 3/8" Replaceable cutting edge
♦ Quick hitch compatible category 1 hitch
♦ 143lbs
RB1560
♦ 60" Working width, 14" blade height
♦ 7 Forward positions 0° up to 45°
♦ 5 Reverse positions 0° up to 30°
♦ 1/2" Reversible cutting edge
♦ Quick hitch compatible category 1 hitch
♦ Optional skid shoe kit available
♦ 248lbs
RB1572
♦ 72" Working width, 14" blade height
♦ 7 Forward positions 0° up to 45°
♦ 5 Reverse positions 0° up to 30°
♦ 1/2" Reversible cutting edge
♦ Quick hitch compatible category 1 hitch
♦ Optional skid shoe kit available
♦ 269lbs
RB1584
♦ 84" Working width, 14" blade height
♦ 7 Forward positions 0° up to 45°
♦ 5 Reverse positions 0° up to 30°
♦ 1/2" Reversible cutting edge
♦ Quick hitch compatible category 1 hitch
♦ Optional skid shoe kit available
♦ 289lbs
Land Pride RB1672
♦ 72" Working width, 14" blade height
♦ 7 Forward positions 0° up to 45°
♦ 3 Reverse positions 0° up to 30°
♦ 5 Tilt positions 15°, 7.5°, 0°, -7.5°, -15°
♦ 1/2" Reversible cutting edge
♦ Quick hitch compatible category 1 hitch
♦ Optional skid shoe kit and hydraulic angle kit available
♦ 297lbs
Land Pride RB1684
♦ 84" Working width, 14" blade height
♦ 7 Forward positions 0° up to 45°
♦ 3 Reverse positions 0° up to 30°
♦ 5 Tilt positions 15°, 7.5°, 0°, -7.5°, -15°
♦ 1/2" Reversible cutting edge
♦ Quick hitch compatible category 1 hitch
♦ Optional skid shoe kit and hydraulic angle kit available
♦ 319lbs
Land Pride RB2684
♦ 84" Working width, 17½" blade height
♦ 7 Forward positions 0° up to 45°
♦ 3 Reverse positions 0° up to 30°
♦ 5 Tilt positions 15°, 7.5°, 0°, -7.5°, -15°
♦ 1/2" Reversible cutting edge
♦ Quick hitch compatible category 1 hitch
♦ Optional skid shoe kit and hydraulic angle kit available
♦ 396lbs
Land Pride RB3784
♦ 84" Working width, 17" blade height
♦ 7 Forward positions 0° up to 45°
♦ 3 Reverse positions 0° up to 30°
♦ 7 Tilt positions -22.5° up to 22.5°
♦ 26" Blade offset with 15° increments left and right
♦ 1/2" Reversible cutting edge
♦ Quick hitch compatible categories 1 or 2 hitch
♦ Optional skid shoe and hydraulic angle kit available
♦ 630lbs
Land Pride RB3796
♦ 96" Working width, 17" blade height
♦ 7 Forward positions 0° up to 45°
♦ 3 Reverse positions 0° up to 30°
♦ 7 Tilt positions -22.5° up to 22.5°
♦ 26" Blade offset with 15° increments left and right
♦ 1/2" Reversible cutting edge
♦ Quick hitch compatible categories 1 or 2 hitch
♦ Optional skid shoe and hydraulic angle kit available
♦ 665lbs
Land Pride RTA1250
♦ Foward tine rotation tiller
♦ 50" Working width, 6 1/2" max tilling depth
♦ 4 C-shaped tines per flange
♦ Horsepower requirement of 15-40HP
♦ Slip clutch protected 540 PTO
♦ Quick hitch compatible category 1 hitch
♦ 1 year full, 3 year gearbox, 10 year chain and sprocket warranty
Land Pride RTA1258
♦ Foward tine rotation tiller
♦ 58" Working width, 6 1/2" max tilling depth
♦ 4 C-shaped tines per flange
♦ Horsepower requirement of 20-50HP
♦ Slip clutch protected 540 PTO
♦ Quick hitch compatible category 1 hitch
♦ 1 year full, 3 year gearbox, 10 year chain and sprocket warranty
Land Pride RTA1266
♦ Foward tine rotation tiller
♦ 66" Working width, 6 1/2" max tilling depth
♦ 4 C-shaped tines per flange
♦ Horsepower requirement of 20-50HP
♦ Slip clutch protected 540 PTO
♦ Quick hitch compatible category 1 hitch
♦ 1 year full, 3 year gearbox, 10 year chain and sprocket warranty
Land Pride RTA1274
♦ Foward tine rotation tiller
♦ 74" Working width, 6 1/2" max tilling depth
♦ 4 C-shaped tines per flange
♦ Horsepower requirement of 25-60HP
♦ Slip clutch protected 540 PTO
♦ Quick hitch compatible category 1 hitch
♦ 1 year full, 3 year gearbox, 10 year chain and sprocket warranty
Land Pride RTA3576
♦ Foward tine rotation tiller
♦ 76" Working width, 7" max tilling depth
♦ 6 C-shaped tines per flange
♦ Horsepower requirement of 35-95HP
♦ Slip clutch protected 540 PTO
♦ Quick hitch compatible category 1/2 hitch
♦ 1 year full, 3 year gearbox, 10 year chain and sprocket warranty
Land Pride RTR1250
♦ Revers tine rotation tiller
♦ 50" Working width, 6 1/2" max tilling depth
♦ 4 C-shaped tines per flange
♦ Horsepower requirement of 15-40HP
♦ Slip clutch protected 540 PTO
♦ Quick hitch compatible category 1 hitch
♦ 1 year full, 3 year gearbox, 10 year chain and sprocket warranty
Land Pride RTR1258
♦ Revers tine rotation tiller
♦ 58" Working width, 6 1/2" max tilling depth
♦ 4 C-shaped tines per flange
♦ Horsepower requirement of 20-50HP
♦ Slip clutch protected 540 PTO
♦ Quick hitch compatible category 1 hitch
♦ 1 year full, 3 year gearbox, 10 year chain and sprocket warranty
Land Pride RTR1266
♦ Revers tine rotation tiller
♦ 66" Working width, 6 1/2" max tilling depth
♦ 4 C-shaped tines per flange
♦ Horsepower requirement of 20-50HP
♦ Slip clutch protected 540 PTO
♦ Quick hitch compatible category 1 hitch
♦ 1 year full, 3 year gearbox, 10 year chain and sprocket warranty
Land Pride RTR1274
♦ Revers tine rotation tiller
♦ 74" Working width, 6 1/2" max tilling depth
♦ 4 C-shaped tines per flange
♦ Horsepower requirement of 25-60HP
♦ Slip clutch protected 540 PTO
♦ Quick hitch compatible category 1 hitch
♦ 1 year full, 3 year gearbox, 10 year chain and sprocket warranty
Land Pride RTR2072
♦ Revers tine rotation tiller
♦ 72" working width, 7" max tilling depth
♦ 6 C-shaped tines per flange
♦ Horsepower requirement of 23-75HP
♦ Slip clutch protected 540 PTO
♦ Quick hitch compatible category 1 hitch
♦ 1 year full, 5 year gearbox warranty
SA10 Sub-Compact and Compact Tractor Auger
♦ 2" Round output shaft
♦ 4-10gpm Hydraulic flow range
♦ 4" Auger position lock increments
♦ 6",9" and 12" Auger diameters available
♦ 48" Auger length
♦ Skid steer quick attach
SA20 Compact Tractor Auger
♦ 2" Hex output shaft
♦ 6-15gpm Hydraulic flow range
♦ Planetary gearbox with Center and 18" offset mount
♦ 6",9",12",15",18",24",30" and 36" Auger diameters available
♦ 50¾" Auger length
♦ Skid steer quick attach